Harvest Module
An aseptic harvest and transfer with pneumatic or manual flushed harvest/bottom valve.Fully automatic OR semi-automatic harvest process sequence with independent SIP / CIP , activities meeting the requirements of qualification…
Sampling Module
A design for an aseptic sampling equipped with flushed sampling valve for manual sampling with inbuilt provision for independent SIP / CIP activities meeting the requirements of qualification & validation.Both…
Foam Control Module
Foam sensor from the top port.Antifoam dosing bottle with aseptic designAntifoam dosing pump integrated with the systemMechanical Foam Breaker if required.Smart process automation for aeration & agitation.
pH Control Module
In situ sterilizable pH sensor from side wall port at minimum mixing level.Acid and alkali dosing bottles with aseptic designAcid & alkali dosing pumps integrated with the system.In case of…
Mechanical Seal
In case of a double mechanical seal, System can be provided withcthermosyphon pot to generate & store sterile condensate. The seal islubricated by pressurized sterile condensate. along with all required…
Agitation/Mixing Module
This is a crucial component of any process solution, particularly in the Fermenter/Bioreactor. For effective mass transfer of nutrients, gases, and temperature maintenance, agitation or mixing is required. The cell…
Sterilization (ESIP/FSIP) & Temperature Control
Sterilization of empty vessels Clean steam is introduced directly into the vessel via spray balls, and the entire system is sterilised by removing steam from all auxiliary lines/valves and sterile…
Additive Module
The system can be designed with any number of aseptic addition ports for Media, Inoculum, Antifoam, Acid, Alkali, Nutrient Feed, and Inducer, depending on the process requirements.Each aseptic addition port…
Exaust & Back Pressure Control Module
Exhaust module with completely drainable Exhaust Condenser/Shell & tube HEX with chilled water Inlet/Outlet, Pipe in pipe heater with steam inlet& condensate drain 0.2-micron filter with provision of independent SIP…
Aeration / DO Control Module
BAPS designed Fermenter / Bioreactors can be supplied with Air, N2, O2, and CO2 depending on the needs of the respective process and culture. Individual MFCs with their own gas…